Double Glazed Window Handles
A new double-glazed window handle can enhance the aesthetics of your home and increase its energy efficiency. The type of window handle you select will impact the overall functionality and operation of your home's windows.
There are three common types of handles. They include cockspur handles, tilt and turn handles and handles with espagnolette. Each type of handle requires a different spindle size.
Replacement spindle
If the handle on your double-glazed windows are not working correctly, it might be time to replace it. The good news is that replacing the handle is relatively simple and inexpensive. But, you must have the appropriate tools and be aware of how to proceed with care. First, you must identify the handle type. Then, you have to determine the spindle that runs through it. This is important to ensure that the replacement handle will fit.
Depending on the type of handle you are using There are various methods to remove it from the window frame. To remove it, you must take off the pin or screw that holds it. The screw or pin is usually located on the inside of the handle. It can be removed with the screwdriver or pliers. After removing the old handle, be sure to remove any screws or pins that might have remained behind. Once you have removed the handle, the spindle should be able to slide out of the handle and into the window frame.
If you're having difficulty opening your handle, it could be because the spindle is worn out. It's good news that replacing the spindle is an easy procedure that can be accomplished in just a few minutes. Remember to take accurate measurements and note the length and diameter. With the right measurements, you ensure that the handle is perfect and won't cause any issues in the near future.
Inline espagnolette handles are the most common uPVC handles. They feature an elongated spindle that slots into the locking mechanism of the window frame. These handles are great for windows that are standard and come in a variety of colors and finishes. However, if you have a tilt and turn window, it's best to use a blade-style handle that can be locked in one of two positions. This will stop children or burglars from gaining access to the window. It also helps to clean the window and secure it when not being used.
Replacement handle
There are several window handles that are available for uPVC double-glazed windows. There are three kinds of handles: Cockspur handles, Tilt-and-Turn handles and Espag handles. Each handle type has distinct functions. For example the cockspur handle is equipped with a mental spindle on the back that controls the window mechanism. The espag handle is equipped with multiple locking points, and the tilt-and-turn handle is locked or unlocked. This lets the window open fully into a space or be dropped down to allow ventilation. The handles are available in different designs, materials and finishes to suit your home.
The replacement handle you choose for your double-glazed window will decide how easy it is to operate the window. Additionally, the size of the handle should be in line with the ironmongery that you have in your home. For instance, if you have brass or chrome handles in your door or furniture, then you should choose an appropriate handle that matches the style of these. You may need a slim window handle, especially if your window is in an area that is small.
Installing new handles on double-glazed windows begins with removing the old one. This can be accomplished by unscrewing the screw or pin that holds the handle in place. Once the screws or pins are removed, you can take off the handle and replace it with the new one. The fixing holes should be aligned on the handle with the frames of the windows.
The next step is to remove the grub screw from the top of the handle. This requires a flat-head driver, but you need to be careful not to damage the handle. Once the grub screw has been removed, you can take off the screws at the top and bottom that secure the handle to the frame of your window. Don't tighten too much because this could cause the handle to split. After removing the screws you can use either a small spanner (or butter knife) to loosen the square drive. This should easily come off and you can replace it with a square rod.
Pins and screws to replace the screws.
It's simple to change your window handle if make use of the correct tools and follow the correct steps. To ensure that you receive the correct replacement, it's important to know the type of handle and the spindle size. It's also essential to keep safety in mind at all times when working with windows and tools.
There are wood window handle of double-glazed window handles: espag handles the cockspur handles, as well as tilt and turn handles. Each handle comes with its particular installation and replacement method. For instance, cockspur handles are attached to a pin, whereas Espag handles require screws. Regardless of the type of handle, you'll have to disassemble it carefully prior to replacing the spindle or screw. Remove the screw or pin holding the handle to the frame of the window with a screwdriver. Then, slide the new handle into the frame. Based on the type of window, you may need to install additional screws or pins in order to secure the handle to the window.
If the handle you have is one of the cockspurs one, it's likely to contain a wedge block that allows it to operate the multi-point lock system of uPVC Windows. This type of handle can be found on older uPVC Windows. It is necessary to replace the wedge when you replace the handle. Cockspur handles are also available in left-handed and right-handed versions, and you'll need to match the handle's handing to the wedge block.
Lastly, espag handles are used on the latest tilt and turn windows that can be opened either inward or outwards to allow to allow ventilation. The espag handle is the most popular type of uPVC window handles, and is usually fitted with a lock in the centre to ensure a secure operation. This type of handle requires an extended spindle. You'll need the correct size step to ensure that you have the proper size for your window.
The kind of handle you require is contingent on the design and material of your uPVC window. In general, uPVC handles are easier to replace than timber ones because they come in standard sizes. Additionally, uPVC handles can be used with different kinds of locks, so you can select the lock that best suits your needs.
Installation
Double glazed window handles come in a variety of different sizes and shapes. The right handle can help your windows become more energy efficient and also complement other ironmongery in your home. You can pick from a wide range of handle styles and they are available in a variety of colours. You can also pick uPVC handles that match your doors and furniture. The style you select will determine how easy it is to open and shut your windows.
Before you begin you must make sure you have the right tools and replacement parts. You must also measure the spindle and identify the type of handle. The wrong size can result in problems in the future. It is also important to take safety precautions when working with windows and tools.
The most commonly used handle for double-glazed windows is the epag handle. They feature the latch that can open and close the window by turning or tilting the handle. Available in a variety of finishes and styles, including brushed bronze, brushed nickel and brass. The handle can also come with a lock for additional security. You can also select an flush handle design built into the frame.
Cockspur handles are a popular choice for uPVC windows. They have a distinctive style with a hook-shaped design and are typically found on older uPVC Windows. They can be operated either by sliding them left or right, or by closing on a wedge inside the frame of the window. They are more secure as they require more force to operate.
If you have a cockspur handle it might be difficult to open the window if the spindle has become broken. But, you can replace the handle with a new one provided you have the appropriate tools and follow the steps correctly. Once you are done check the window to ensure it is working correctly. Examine the locks to make sure they are secure and functioning properly. You can always call a professional if you notice any issues.